Health Floors - 200 sq ft, DIY @ $6.00 / sq ft
- Description
- Specifications
- Customer Reviews (0)
*** Please Note That We Give Discounts On Large Orders. If Your Project Is = or > 1,000 SQ FT. Please Choose Manual Payment Option For Requesting A Discounts ***
HEALTH FLOORS utilize a new technology to help bring an answer to a problem we all commonly face: joint pain. Years of standing on concrete and other hard flooring has taken a toll on our bodies. We move from point A to point B looking for the next place to sit down. This excessive sitting down is causing more pain as well as imbalance. Our desire to help alleviate these pains combined with our background in resinous flooring brought this product to fruition. Simply put your body deserves this level of comfort so that you will want to stand
*** Please Note That These Floors Are Made For Comfort. No Heels Or Sharp Feet of Furniture Allowed. Please Wear Flat Bottom Shoes And Put Moving Sliders Under The Feet Of Furniture That Has Points Or Does Not Disperse Weight Over Large Area***
Included in purchase:
Detailed Instructions For Do It Yourself or Manage It Yourself Installation
200 square feet of 2' x 2' Square Tiles of 1" Thick, Low Density, EDM FOAM
4 gallons of 100% Solids Epoxy Coatings Custom Formulated For Flexibility and Increased Lateral Strength
Needed Aggregates Depending Upon Desired Finish:
EZ-Marble, 16 ounces of Metallic Color Pigments
EZ-Flake, 25 lbs of 1/2" or 30 lbs of 1/4" Polymer Flakes
EZ-Solid, 60 Mesh or 320 Mesh Aluminum Oxide, For Light to Medium Slip Resistance
EZ-Solid, 50lbs of Coal Slag Abrasive, For Extreme Slip Resistance
*** Please Note That Our Health Floors Materials Ship From 3 Separate Processing Plants As Each Plant Specializes In Each Needed Component For Your Installation ***
Supplies needed for installation, but not included are as follows:
Pressure sensitive adhesive which can be found at your local hardware supply house such as this one: PRESSURE SENSITIVE ADHESIVE - Applied with medium nap roller at approximately 200 sq ft per gal
Medium nap roller cover, chip brushes, frame, and extension pole needed for installing floor.
Foam tape to create material borders at edges of floor, can be found at your local home improvement supplier or online such as here: FOAM TAPE
Transition strips if desired to use on edge. Not a necessity
Sky's the limit!!!
*** Please Note That These Floors Are Made For Comfort. No Heels Or Sharp Feet of Furniture Allowed. Please Wear Flat Bottom Shoes And Put Moving Sliders Under The Feet Of Furniture That Has Points Or Does Not Disperse Weight Over Large Area***
Included in purchase:
Detailed Instructions For Do It Yourself or Manage It Yourself Installation
200 square feet of 2' x 2' Square Tiles of 1" Thick, Low Density, EDM FOAM
4 gallons of 100% Solids Epoxy Coatings Custom Formulated For Flexibility and Increased Lateral Strength
Needed Aggregates Depending Upon Desired Finish:
EZ-Marble, 16 ounces of Metallic Color Pigments
EZ-Flake, 25 lbs of 1/2" or 30 lbs of 1/4" Polymer Flakes
EZ-Solid, 60 Mesh or 320 Mesh Aluminum Oxide, For Light to Medium Slip Resistance
EZ-Solid, 50lbs of Coal Slag Abrasive, For Extreme Slip Resistance
*** Please Note That Our Health Floors Materials Ship From 3 Separate Processing Plants As Each Plant Specializes In Each Needed Component For Your Installation ***
Supplies needed for installation, but not included are as follows:
Pressure sensitive adhesive which can be found at your local hardware supply house such as this one: PRESSURE SENSITIVE ADHESIVE - Applied with medium nap roller at approximately 200 sq ft per gal
Medium nap roller cover, chip brushes, frame, and extension pole needed for installing floor.
Foam tape to create material borders at edges of floor, can be found at your local home improvement supplier or online such as here: FOAM TAPE
Transition strips if desired to use on edge. Not a necessity